Linux Wireless

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

Go back –> [[en/users/Drivers/ath10k|ath10k]] 

 


===== ath10k Coding Style =====


==== Linux coding style ====

ath10k mostly follows [[https://www.kernel.org/doc/html/latest/process/coding-style.html|Linux Coding Style]], so read that first. 

==== Checking code ====

For checking the code we have a dedicated script [[https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath10k/ath10k-check|ath10k-check]] which runs various tests, including sparse and checkpatch. Run the script with ''--help'' to see the installation and usage instructions. Strongly recommended to run this before submitting patches as it can catch common problems. Example:

<code>
~$ cd ~/ath
~/ath$ ls
arch/    debian/         include/  lib/                               Module.symvers  sound/
block/   Documentation/  init/     localversion-wireless-testing      net/            tools/
certs/   drivers/        ipc/      localversion-wireless-testing-ath  README          usr/
COPYING  firmware/       Kbuild    MAINTAINERS                        samples/        virt/
CREDITS  fs/             Kconfig   Makefile                           scripts/        vmlinux-gdb.py@
crypto/  GNUmakefile     kernel/   mm/                                security/
~/ath$ ath10k-check
drivers/net/wireless/ath/ath10k/debug.h:207: return is not a function, parentheses are not required
drivers/net/wireless/ath/ath10k/debug.h:209: return is not a function, parentheses are not required
drivers/net/wireless/ath/ath10k/debug.h:210: return is not a function, parentheses are not required
drivers/net/wireless/ath/ath10k/debug.h:214: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/debug.h:218: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/debug.c:2430: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/debug.c:2430: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/debug.c:2431: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/debug.c:2431: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/debug.c:2464: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/debug.c:2464: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/debug.c:2465: code indent should use tabs where possible
drivers/net/wireless/ath/ath10k/debug.c:2465: please, no spaces at the start of a line
drivers/net/wireless/ath/ath10k/debug.c:2493: Please don't use multiple blank lines
drivers/net/wireless/ath/ath10k/debug.c:2525: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
drivers/net/wireless/ath/ath10k/debug.c:2527: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
drivers/net/wireless/ath/ath10k/debug.c:2620: Alignment should match open parenthesis
drivers/net/wireless/ath/ath10k/debug.c:2640: Alignment should match open parenthesis
~/ath$
</code>

==== Status/error variables ====

Use a variable named "ret" to store return values or status codes. Also propagate the error code to upper levels. 

Example: 


<code>int ret;

ret = request_firmware(&fw_entry, filename, ar->dev);
if (ret) {
        ath10k_warn("Failed to request firmware '%s': %d\n",
                    filename, ret);
        return ret;
}

return 0;</code>
Name context variables either "ar" or "ar_<hifname>". Use ath10k_<hifname>_priv() to get access to hif specific context. 

Examples: 


<code>struct ath10k *ar = ptr;
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);</code>
For consistency always use the main context (struct ath10k *ar) as function parameter, don't use hif specific context. 


==== Error path ====

Use goto labels err_<action> for handing error path, with <action> giving a clear idea what the label does. 

Example: 


<code>ret = ath10k_hif_power_on(ar);
if (ret)
        return ret;

ret = ath10k_target_start(ar);
if (ret)
        goto err_power_off;

ret = ath10k_init_upload(ar);
if (ret)
        goto err_target_stop;

return 0;

err_target_stop:
        ath10k_target_stop(ar);

err_power_off:
        ath10k_hif_power_off(ar);

return ret;</code>
Print error codes after a colon: 


<code>ath10k_warn("failed to associate peer STA %pM: %d\n",
            sta->addr, ret);</code>
Try to start the warning messages with the verb "failed" if possible. Warning and error messages start with lower case. 

ath10k_warn() is used for errors where it might be possible to recover and ath10k_err() for errors when it's not possible to recover in any way. 

Dan Carpenter's post about error paths: [[https://staticthinking.wordpress.com/2022/04/28/free-the-last-thing-style/|https://staticthinking.wordpress.com/2022/04/28/free-the-last-thing-style/]] 


==== Locking ====

Always document what spinlock/mutex/rcu actually protects. Locks should always protect data, not code flow. 


==== Naming ====

Name of symbols and functions follow style <drivername>_<filename>_<symbolname>. 

Example: 

<code>int ath10k_mac_start(struct ath10k *ar)</code>

For each component use function names create/destroy for allocating and freeing something, register/unregister for initializing and cleaning up them afterwards and start/stop to temporarily pause something. 

Example: 


<code>int ath10k_cfg80211_create(struct ath10k *ar)
int ath10k_cfg80211_register(struct ath10k *ar)
int ath10k_cfg80211_start(struct ath10k *ar)
void ath10k_cfg80211_stop(struct ath10k *ar)
int ath10k_cfg80211_unregister(struct ath10k *ar)
void ath10k_cfg80211_destroy(struct ath10k *ar)</code>

==== Comments ====

Multiline comment style is: 


<code>/* Foo
 * Bar
 */</code>

==== Error messages ====

For warning and error messages we have ath10k_warn() and ath10k_err().

ath10k_warn() should be used when ath10k still continues to work, for example then some limit has been reached or an unknown event has been received. It's also rate limited.

ath10k_err() should be used when a fatal error has been detected and ath10k will shut itself down, for example during driver initialization or firmware recover fails. It is NOT rate limited.

Examples:

  ath10k_warn(ar, "failed to submit frame %d: %d\n", frame_index, ret);
  ath10k_err(ar, "failed to wake up the device from sleep: %d\n", ret);

==== Debug messages ====

Use ath10k_dbg() or ath10k_dbg_dump().

The format string for ath10k_dbg() should start with debug level followed by name of the command or event and then parameters. All lowercase and no commas, colons or periods.

Examples:

<code>ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n");

ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi mgmt tx skb %pK len %d ftype %02x stype %02x\n",
	   msdu, skb->len, fc & IEEE80211_FCTL_FTYPE,
	   fc & IEEE80211_FCTL_STYPE);

ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n",
	   sta->addr, bw);
</code>
==== Things NOT to do ====

Don't use void pointers. 

Don't use typedef.
Linux Wireless

User Tools

Site Tools

Page Tools
