Linux Wireless

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.



===== About nl80211 =====

nl80211 is the new 802.11 netlink interface public header. Together with [[en/developers/Documentation/cfg80211|cfg80211]] it is intended to replace Wireless-Extensions. nl80211 and [[en/developers/Documentation/cfg80211|cfg80211]] are still under development. 


===== Users of nl80211 =====

Current users of nl80211: 
  * [[en/users/Documentation/iw|iw]] 
  * [[en/developers/Regulatory/CRDA|crda]] 
  * [[en/users/Documentation/hostapd|hostapd]] 
  * [[en/users/Documentation/wpa_supplicant|wpa_supplicant]] (with **-Dnl80211**) 


===== libnl tiny =====

[[http://openwrt.org/|OpenWrt]] folks created a tiny version of libnl based on a git snapshot, which only contains genl, not rtnetlink or any of the netfilter stuff, and compiles down to less than 30k in binary size. You can find it here: 

[[https://git.openwrt.org/?p=openwrt/openwrt.git;a=tree;f=package/libs/libnl-tiny;hb=HEAD]] 



===== Kerneldoc for nl80211 =====

[[http://git.kernel.org/?p=linux/kernel/git/linville/wireless.git;a=blob;f=include/uapi/linux/nl80211.h;hb=HEAD|include/uapi/linux/nl80211.h]] 


===== testmode (CONFIG_NL80211_TESTMODE=y) =====

The nl80211 testmode command helps implementing things like factory calibration or validation tools for wireless chips. 

This functionality could possibly be used for SAR testing (Specific Absorption Rate), MPE testing (Maximum Permissible Exposure), RF testing (Radio Frequency), as possibly requested by institutions such as FCC. 

According to [[http://kernelnewbies.org/Linux_2_6_32|kernelnewbies.org Linux_2_6_32]], testmode has been introduced by nicely described commit [[http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=aff89a9b9084931e51b89d8f3ee3c547bea6c422|aff89a9b90849]]. 

This setting is currently provided by [[http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/net/wireless/Kconfig|net/wireless/Kconfig]]. 

For a way to determine whether a wireless driver actually supports nl80211 testmode interface, see [[http://markmail.org/message/j4nfshv4edn2ga7f|[PATCH] nl80211: add testmode to the list of supported commands]]. 

Current users of the testmode interface are: 
    * [[en/users/Drivers/wl12xx/calibrator|wl12xx calibrator]] (chipsets WL1271 etc.) 

TODO: could list (references to) ready-made scripts which implement nicely automated / elegant workflows for SAR testing etc. 

For ATH9K chipsets, there's SAR testing functionality provided via the non-testmode setting [[http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/ath/ath9k/Kconfig|CONFIG_ATH9K_TX99]]. Hmm, this possibly needs conversion to (additionally?) providing the generic nl80211 testmode functionality?
Linux Wireless

User Tools

Site Tools

Page Tools
