Go back --> [[en/users/Drivers/ath10k|ath10k]]
===== ath10k monitor mode =====
ath10k supports monitor mode. Recommended firmware version for a sniffer is 10.1.467.2-1. Also use recent enough wireshark which supports 11ac.
To tune into 80 MHz channel, in this example channel 36 (5180 MHz):
ip link set wlan0 down
iw wlan0 set type monitor
ip link set wlan0 up
iw wlan0 set freq 5180 80 5210
To capture HT40+ on channel 36:
iw wlan0 set freq 5180 40 5190
==== Known issues ====
* Assoc Request frames not captured (Assoc Response shows up fine)
* cannot see Add BA action frames
* frames do not come up with FCS value in them
* the management frames do not contain mac timestamp as data/control frames